Quick reference for resetting a Yealink W60B or W70B DECT base station to factory defaults. The steps below apply to both models.

Note: a factory reset removes all paired handsets and configuration settings from the base station.

Hard Reset (Physical Button)

1. Unplug the base station’s power supply (or network cable, if powered via PoE).
2. Press and hold the Paging button on the base station, and keep it held down.
3. While still holding the button, reconnect the power supply.
4. Keep holding the button until all LED indicator lights on the base station turn on.
5. Release the button. The base station will restart and reset to factory defaults

Reset via Web Interface

1. Enter the base station’s IP address into a web browser.
2. Log in using the admin credentials (default: admin / admin).
3. Go to Settings > Upgrade > Reset to Factory Settings.
4. Confirm the reset when prompted.